Construction Hoists
ALIMAK SCANDO 650
Technical Data
| Payload capacity | 1,500–3,200 kg |
| Speed | 38–65 m/min. |
| Max. lifting height | 250 m (Increased lifting height on request.) |
| Car width (internal) | 1.5 m |
| Car length (internal) | 3.2–3.9 and 3.9–4.6 m |
| Car height (internal) | 2.3 m |
| Motor control | DOL/FC |
| No. of motors | 2–3 |
| Safety device type | GFD-II |
| Power supply range | 380–500 V, 50 or 60 Hz, 3 phase |
| Type of mast | A-50, Tubular steel with integrated rack |
| Length mast section | 1.508 m |
| Weight mast section with 1 rack | 118 kg |
| Rack module | 5 |
Alimak has taken construction hoist technology to unprecedented levels with the introduction of the all-new Scando 650; a modular system that can adapt to different applications using relatively few modules and components.
Available in single or twin car configuration, the Scando 650 offers payloads of 1,500 to 3,200 kg/car and has a standard maximum lifting height of 250 m, which can be increased on request.
The free-standing mast height is 32 m when equipped with an optional pipe support.
Two or three FC frequency control or two DOL motors drive the system through a high efficiency gearbox. The Scando 650 operates at speeds up to 65 m/min and provides more hoistpower, while using as much as 40% less power than previous Scando models. Higher speed versions will be introduced later in the year.